|
|
|
Hard to Find Delta Accessories @ Amazon Partners:
This site is tested and best viewed with Microsoft Internet Explorer 5.0,
if some of the product listings or other features do not work it may be do to
the browser you are using. We are sorry for any inconvenience. Copyright © 2003-2005 Weber
Woodworking. All Rights Reserved. |
SPECIALS: New Old Stock Delta/Rockwell 14" Band Saw Riser Block: Brand New Old Stock Delta/Rockwell Band Saw Riser Block. Supply your own
hardware and save with this riser block made to increase the resaw capability
of the Delta 14" band saw from 6" to 12". Block is black and
machined on each face with milled locator holes. $59.95
including shipping
3 NOS Delta Drill Press Handles NEWYou are bidding on 3 Drill Press Handles. These are new old stock and used
on the smaller Delta drill presses. Lots of applications for jig and fixtures
as well. End is a 3/8" x 16 tpi thread. $19.95 including
shipping
Delta 12" Radial Saw Roller Head Retrofit KitBrand New Delta 12" Radial Arm Saw Roller Head Retrofit Kit, p/n
424-02-628-0011. Kit adds washers to your slide bearings. Besides the washers
the kit includes 2 plain studs and 2 eccentric studs. All studs are longer to
allow for the additional washers. Also included are complete instructions. $15.00
including shipping.
New Delta Rockwell HD Lathe Tail Stock HandwheelBrand New Old Stock Delta/Rockwell Heavy Duty Lathe Tail Stock Chrome
Handwheel. This 4" handwheel has a quick spinner and fits most of the
Delta Rockwell Heavy Duty and Regular Duty Lathe Tail Stocks with a 3/8"
shaft and pin, and attaches with a set screw. Item is new and unused, but has
been stored loose and may have some slight imperfections and warehouse dirt.
There is also enough meat in the handle to drill it out to 1/2" for use
on the larger heavy duty lathes. I did this to one for my own lathe and it
works great. $39.95 including shipping
NOS Delta Left Tilt Unisaw Steel Motor Cover NEWBrand New Old Stock Delta/Rockwell Left Tilt Unisaw Motor Cover. Cover is
stamped steel with a hinged side. Part number 422-04-331-0004. Inside
dimensions where the cover meets the saw are approximately 15" wide by
18" tall. This is a new cover that ships in a Delta OEM box. $64.95
Including Shipping
NOS Delta Rockwell Radial Arm Saw RAS Table Kit - NEWBrand New Old Stock Delta Rockwell Radial Arm Saw table board set. This
set includes the fixed table, adjustable tables. This is a large set. Overall
is 44" wide and the boards are 20-1/4", 5-3/4", 2", and
1-1/4" wide. Table is a composite wood material. Delta part number is
424-12-311-0007. May fit many saws, but might require new mounting holes. Kit
is brand new in Delta box and never used. $74.95 including shipping
New Old Stock Delta Rockwell 8" Jointer Guard and Spring: Brand New Old Stock Delta/Rockwell Guard and Spring for the older style
made in the USA 8" jointer. Part Number 418-04-354-5002. It may fit
others with little or no modification. Guard is very good condition, but may
have some scuffs from long term storage. Overall the paint is bright and
fresh. Early jointers had an unpainted aluminum guard and the red paint was a
later modification for safety. Guard is heavy cast and well constructed.
These are very hard to find let alone in new old stock condition. The picture
is representative of overall condition, the condition of the piece you
receive could vary slightly. All pieces are new, however they do have some
warehouse dirt from storage and transportation over the years. The change
in color on the guard is a shadow. $49.95 including shipping New Old Stock Delta Rockwell 24" Scroll Saw Drive Shaft Housing: Brand New Old Stock Delta/Rockwell 24" Scroll Saw Drive Shaft Housing
and Connecting Rod Bushing/Bearing. This item includes bearings and blower
assembly in a small sub-assembly. The housing is part number 430-02-312-0008
and the connecting rod is 430-02-308-0001. Item is new old stock, but was
stored loose and uncovered so it may be a little rough and dirty. These fit
24" scroll saws models 40-406, 40-407, 40-409, 40-416, 40-417, 40-419,
40-441, and maybe others, but you should check parts list for exact models.
Blower parts may fit other models as well, but again please check parts list
to confirm this will work for your application. Parts list can be found at
Delta's web site or www.acetoolrepair.com. These are very hard to find let
alone in new old stock condition. Paint is fair to ok, and there are some
scrapes from long term storage. The pictures are representative of overall
condition, the condition of the piece you receive can vary slightly. All
pieces are new, however they do have some warehouse dirt from storage and
transportation over the years. $34.95 including shipping
NOS Delta Rockwell Sawbuck Guard Assembly: Brand New Old Stock Delta/Rockwell SawBuck Guard Assembly This is a
retrofit giving the Sawbuck independent leaf guards. Some older machines may
have a fixed guard, this redesigned guard will fit 33-050 Sawbucks regardless
of current guard configuration. Guard is brand in factory sealed box. part
number 422-32-354-0001. Also included are the Service Bulletin and
Instruction Sheet. $34.95 including shipping
NEW Delta Sawbuck Miter Saw Alignment Fixture: Brand New Delta Sawbuck Miter Saw Alignment Fixture p/n 422-25-121-0001.
This fixture permits quick, accurate cutting angle realignment of sawbucks
that have been subjected to rough handling or disassembly for routine
service. Made with 6061 Al and steel guides. Steel may have some slight rust
from storage. Also includes instructions. $39.95 including shipping
NOS Delta Rockwell Sawbuck II Fixed Table - NEW: Brand New Old Stock Delta/Rockwell SawBuck Fixed Table. Part Number
422-32-391-0003 . Table is new in a factory sealed box. Fits SawBuck II
33-055, and other SawBuck II series saws, please check with your parts list
to compare part number. No Shipping to Alaska or Hawaii. $84.95
including shipping to the lower 48 states
Delta Rockwell Graphite Cloth, Sanders Etc... 3 sheets: 3 Sheets of new graphite coated cloth. The material is surplus from
Delta/Rockwell for use in their tools. Each sheet measures 6" x
15". Graphite coated cloth by Process Engineering Corporation of Crystal
Lake, Illinois. Ideal for sander beds, but has a multitude of other uses when
a slick surface is required. $15 including shipping
NEW Delta 1 hp 1 ph electric motor by CMG: Brand New Delta 1 hp single phase motor. Made in Australia by CMG Electric
Motors. Motor is wired for 240 volts with a 8.2 amps draw. Motor is labeled
1445 rpm, however box states 1730 FL. RPM. Delta part number 1348871. Shaft
is 3/4" and keyed (key is included), and 2" long. Frame is not
numbered and bolts directly to motor housing. Frame is 4" x 7-1/8".
Motor includes 2 capacitors and a reset button. This is a very heavy well made
1 hp motor and would work for any number of machines. Normal retail
list on this motor is $905. Items are described as accurately as
possible, however errors are possible, if you have any questions please ask.
Alaska and Hawaii pay actual shipping charges.$260 including shipping |
